Showing 1161–1180 of 5660 results
Suitable for joggling, crimping and hole punching Features
Operating pressure 6.2bar
Nominal air consumption 0.3 cfm per stroke
Crimping capacity 1.6mm steel, 2mm aluminium
Hole size 3/16″ (4.8mm)
Weight: 1.3Kg
Compact and lightweight, the slimline design of this tool allows easy access to confined spaces such as engine bays etc. Features
Max. torque 75ft/lb / 101Nm
Operating pressure 6.2bar
Air consumption 4cfm
Weight: 1.3Kg
Drive size: 3/8″
This in-line regulator provides smooth consistent air tool performance. Features
½” BSP female inlet and outlet
½” BSP male to male adaptor
2 x ½” BSP to ¼” BSP reducers
Wall bracket
Pressure gauge units in PSI and bar
Max supply pressure 14.7 bar
Max outlet pressure 9.7bar / Regulating range: 0.5-8.3bar
This compact high speed kit is ideal for all manner of precise shaping, smoothing and finishing applications. Light weight and ergonomic grip enables a delicate touch for accurate detail work. Great value for both hobby and professional users. Features
Operating pressure up to 6.2bar (90psi).
Nominal air consumption – 8cfm.
Maximum speed – 20,000rpm.
All supplied complete in moulded storage / carr
A pair of broad base professional duty axle stands with positive ratchet action for quick height adjustment and secure locking under downforce load.
Features
Weight capacity per pair: 6 Tons
Minimum height: 400mm
Maximum height: 615mm
Heavy duty welded steel construction for increased strength and safety. Suitable for commercial vehicles. Features
10 tonne capacity per stand (sold individually)
Steel construction with pin and chain load support
Wide ‘U’ shaped saddle for even load distribution
5 height positions
Min/max height 450/750mm
2 Tonne folding Axle Stands – Welded steel construction for increased strength and safety.
Features
2 tonne capacity per pair
Can be folded when not in use
Steel construction with pin and chain load support
‘U’ shaped saddle for even load distribution
4 height positions
Min/max height 235/360mm
A pair of broad base professional duty axle stands with positive ratchet action for quick height adjustment and secure locking under downforce load. Features
Weight capacity per pair – 3 Tons
Minimum height – 300mm
Maximum height – 430mm
3 Tonne Axle Stands – Welded steel construction for increased strength and safety.
Features
3 tonne capacity per pair
Steel construction with pin and chain load support
‘U’ shaped saddle for even load distribution
5 height positions
Min/max height 325/490mm
These 6 Tonne Axle Stands have been constructed from a welded steel construction for increased strength and safety.
Features
Maximum Load: 3 Tonnes per stand. 6 Tonnes per pair
Steel construction with pin and chain load support
‘U’ shaped saddle for even load distribution
5 height positions
Min/max height: 333-500mm
12V 2A Auto battery charger/maintainer – This vehicle charger automatically performs the charging function in three stages. The first stage provides a maximum charging current to reenergise a depleted battery. The second stage will take the charge from approx. 70% to 90% capacity by holding a constant charging voltage while the current reduces. The final maintenance or conditioning stage will puls
12V 8A Auto battery charger/maintainer – This vehicle charger automatically performs the charging function in 9 stages. The first 5 stages perform diagnostics and recovery depending on the condition of the battery. After recovery a bulk charge brings the battery up to approximately 80% of capacity. This stage is followed by a low current charge up to almost 100% capacity. The final maintenance or
6/12V 4A Auto battery charger/maintainer – This vehicle charger automatically performs the charging function in 9 stages. The first 5 stages perform diagnostics and recovery depending on the condition of the battery. After recovery, a bulk charge brings the battery up to approximately 80% of capacity. This stage is followed by a low current charge up to almost 100% capacity. The final maintenance
Simple to use with clear LED indication showing the correct operation of the alternator and battery condition.
Features
For use on 12V Lead acid batteries (car batteries).
Checks sufficient battery charge when starting and indicated charge level after a period on load.
Three LED indicators show whether battery condition is strong, normal or weak.
Two LED indicators show whether alternator output i
High specification stainless steel pump for extracting water from bore-holes, wells, clean water deposit & collection tanks. Multistage (in this case 8) pumping assures an exceptionally consistent & high flow rate, big ‘head’ (lift) heights, & stable water flow. Versatile too, it can be installed & operated in both vertical and horizontal positions. Features
Max. flow rate 80 ltrs/min
Max. head (l
Manufactured from pure cotton this mop is suitable for cutting & polishing compounds, and perfect for removing lines & smoothing surfaces. This open mop is for use with the CBB150 bench buffer/polisher 6500485
For use with CBB150
Pure cotton manufacture
Diameter: 150mm
Width: 8mm
Bore: 12.7mm
Speed: 4450rpm
Manufactured from pure cotton this mop is suitable for cutting & polishing compounds, and perfect for removing lines & smoothing surfaces. This stitched mop is for use with the CBB150 bench buffer/polisher – 6500485
For use with CBB150
Pure cotton manufacture
Diameter: 150mm
Width: 8mm
Bore: 12.7mm
Speed: 4450rpm
The CBB150 is ideal for buffing and polishing metal and composite surfaces to a bright lustred finish. This unit features a robust cast iron base with rubber feet which reduces vibration, and this model can also be bolted to a work bench to make it even easier to use.
With its built in motor delivering 250W of power and 2850rpm combined with its bearing balanced precision machined shafts, this buf
The CBB200 is ideal for buffing and polishing metal and composite surfaces to a bright lustred finish. This unit features a robust cast iron base with rubber feet which reduces vibration, and this model can also be bolted to a work bench to make it even easier to use.
With its built in motor delivering 370W of power and 2850rpm combined with its bearing balanced precision machined shafts, this buf
This top of the range HEAVY DUTY PLUS three drawer, step up tool chest displays super quality features from every angle. Features
Multi ball bearing drawer runners for a super smooth sliding action – Max Drawer Load 38kg (evenly distributed)
Special push-lock feature for added safety preventing drawers opening accidentally if tilted
All drawers feature full width aluminium pull handles and protect
End of content
End of content
In order to provide you a personalized shopping experience, our site uses cookies. By continuing to use this site, you are agreeing to our cookie policy.
Don't have an account yet? Sign up
200 Litre 3HP 10 Bar Compressor (230V)
1 × €1,154.99 
CAT213 X-PRO Air Nibbler
1 × €60.86 
3.2mm Aluminium Filler Rods (Grade 5356)
1 × €20 
Black Fitters Glove
1 × €3 
Bosch 3 Piece Brushless Kit Combi Drill, Impact Driver/Wrench & SDS Drill (2x4Ah)
1 × €599.99 
2" Anti Spatter Clear Plastic Lens - Packet of 2
1 × €4.96 
Bosch 4 Piece Brushless Kit Combi Drill, Impact Driver/Wrench, SDS Drill & Grinder (2x4Ah)
1 × €760 
12" Klingspor A24 Extra Cutting-Off Discs
1 × €5.72 
Bosch Battery Starter Set: 2 x GBA 4Ah ProCORE 18V Batteries + GAL 18V-40 Charger
1 × €240 CAT865 Air Regulator With Gauge
1 × €31.61