Showing all 16 results

  • 2 Handle Kajo Grease Gun

    0 out of 5
    86.10

    Heavy duty two handed grease gun
    Complete with armoured pipe and nozzle tube
    Suitable for 400g and 500g cartridges
    Colour: Silver / Blue

  • ADblue Mercedes Additive 10 Litre

    0 out of 5
    28.11

    AdBlue is a reducing agent produced to ISO 22241 standard for the SCR exhaust after-treatment devices in the latest generation of diesel powered Euro IV, Euro V and Euro VI engines. The formulation must comply with the ISO 22241 specification and is known as Automotive Grade Urea Solution AUS 32 and AdBlue.

  • Ama Synthetic Oil for 2 Stroke Engines XP-Line, Mixture 2%

    0 out of 5
    2.50

    Syntetic based oil designed for chainsaws and brushcutters. Proven to mix readily with unleaded and leaded fuel. It protects engine and muffler against harmful deposits, lowers exhaust smokes, extends spark plug life.
    100ml

  • Carlub e ISO220 Chain Saw Oil 4.55 Litre

    0 out of 5
    27.24

    High quality chainsaw oil specially formulated from solvent refined paraffinic base oil that is treated with additives to prevent the oil being flung off the chain thus minimsing wear.

  • CGG400 3-Way Lever Grease Gun

    0 out of 5
    43.84

    A professional manually operated side lever grease gun with performance equal to that of some larger air operated systems. Slim linear design enables this self contained unit to reach into many awkward and difficult to access areas.
    Features
    4-jaw coupler with angled delivery tube
    Delivers up to 1.2cc per stroke
    3 way filling operation – standard 400g cartridge, suction or bulk fill up to 500cc
    Ai

  • EP2 400g Cartridge of Grease

    0 out of 5
    6.96

    A high quality multipurpose EP2 lithium grease suitable for most grease guns

  • Hydraulic Power Steering Oil 1 Litre

    0 out of 5
    15.68

    Carlube fully synthetic central hydraulic power steering and suspension fluid suitable for use in certain power steering units, suspension systems, traction control systems, electrical soft-tops and central locking systems.

  • Milwaukee 12V Grease Gun Bare Unit with 6.0Ah Lithium-Ion Battery and Rapid Charger

    0 out of 5
    340.54

    This set includes the Milwaukee 12V Grease Gun Bare Unit ( MILM12GG0 ), the Milwaukee M12B6 12V 6.0Ah Red Lithium-Ion Battery ( MILM12B6 ), and the Milwaukee M12-18 FC Rapid Charger ( MILM1218FC ).
    Milwaukee 12V Grease Gun Bare Unit (MILM12GG0)
    The Milwaukee M12 GG Cordless Grease Gun has a powerful 12 volt motor to deliver over 562 bar maximum operating pressure. It has an excellent charge time,

  • Oil Treatment 300ml

    0 out of 5
    4.49

    An engine oil treatment containing a concentrated blend of high performance additives and shear stable polymers formulated to provide extra protection for petrol and diesel engine oils. Even under normal driving conditions the protective additives in motor oils breaks down over time, resulting in engine wear and sludge desposits. Carlube Oil Treatment is designed to replenish these vital engine co

  • Soluble Cutting Oil

    0 out of 5
    26.20

    Turbo Steel soluble cutting oil is formulated to enhance cutter performance and extend tool life.
    use with M2 annular broaching cutter
    increases tool life
    ensures positive slug ejection
    maximises productivity
    reduces heat build up
    Mixes with water at a ratio of 20 parts to 1.

  • Stop Smoke 300ml

    0 out of 5
    4.49

    Stop Smoke is specially formulated to prevent blow-by – a condition that occurs when oil enters the combustion chamber and is burned by the fuel, resulting in blue smoke smoke from the exhaust pipe and excessive oil consumption. The condition of blow-by often occurs in older high mileage engines.

  • Tapping & Cutting Oil 300ml

    0 out of 5
    13.73

    300ml

  • TRIPLE QX Maintenance Spray 600 ml

    0 out of 5
    11.69

    TRIPLE QX Maintenance Spray 600 ml
    A multi purpose lubricant with dewatering, penetrating and corrosion inhibition properties. Does not contain silicone
    Where to Use:
    On all ferrous metals, as a general purpose lubricant specifically designed to release seized and corroded components, as a general purpose light duty lubricant, a dewatering fluid or as a temporary anti-corrosive coating.
    Where NOT

  • WD-40 450ml Smartstraw

    0 out of 5
    12.30

    WD-40 450ml Smartstraw
    WD-40 protects metal from rust and corrosion, penetrates stuck or jammed parts, displaces moisture and lubricates just about anything. WD-40 is also great when it comes to cleaning grease, grime and other marks from most surfaces. WD-40 Smart Straw has a fixed delivery system which means you?ll never lose the straw again! For a more precise, narrow spray simply lift the stra

  • WD-40 Specialist Anti Friction Dry PTFE Lubricant 400ml Smart Straw Spray

    0 out of 5
    9.83

    The WD-40 Specialist Dry PTFE Lubricant contains PTFE which provides enhanced lubrication, leaving a white dry film that won’t attract dirt, dust or oil. Its quick drying and also great as a mould release agent.
    Specifications
    Withstands temperatures of (-20 degrees C) to (+250 degrees C)
    Enhanced lubrication and protection
    Dry clear film that resists dirt, dust and oil
    For use on Metal, Plastic a

  • WD-40 Specialist High Performance PTFE Lubricant 400ml Smart Straw Spray

    0 out of 5
    8.97

    The WD-40 High Performance PTFE Lubricant is part of the specialist WD-40 collection. This long lasting lubricant is perfect for use on Metals, Glass, Vinyl, Rubber and Plastic and even helps towards extending the life of tools and equipment.
    Specifications
    Withstands temperatures of (-20 degrees C) to (+100 degrees C)
    Long lasting lubrication
    Extends life of tools and equipment
    For use on Metals,

End of content

End of content