CVC9 9″ Table Vice
€29.40The easy way to secure a workpiece to the drill press table. Ideal for repetitive, quick change operations. Features
Overall length 229 mm
Clamping jaws screw adjustable up to 95 mm
Showing 81–100 of 112 results
-
-
CVR125BL Swivel Base Bench Vice
€64.27A light duty general purpose bench vice. Fitted with an anvil, swivel base and machined jaws. Ensures a firm grip to make a number of cutting, shaping, forming jobs much easier. Features
Jaw width 125mm
Max jaw opening 100mm
Jaw depth 50mm
Weight 7.5kg -
CVR150BL Swivel Base Bench Vice
€108.10A light duty general purpose bench vice. Fitted with an anvil, swivel base and machined jaws. Ensures a firm grip to make a number of cutting, shaping, forming jobs much easier. Features
Jaw width 150mm
Max jaw opening 105mm
Jaw depth 65mm
Weight 11.5kg -
DGA1 Drill Grinding Attachment
€26.72Handy accessory for quick and easy sharpening of drills from 1/8″ – 3/4″ diameter. Features
-
ET101 8-Piece Short Drive/Pin Punch Set
€12.18A comprehensive 8 piece short drive set for general engineering use. Features
Comprises: 1/16″, 3/32″, 1/8″, 5/32″, 3/16″, 7/32″, ¼”, 5/16″ -
ET102 Automatic Centre Punch
€8.15Hand pressure alone will operate this surface impacting and marking device. Adjusting the internal spring tension varies the depth of impression.
Features
Hardened & ground punch points
No hammer required
Point is easily removed for re-sharpening or replacement -
ET103 5-Piece Long Drive/Pin Punch Set
€16A useful set of 5 long drive pin punches for general engineering use. Features
Comprises: 1/8″, 3/16″, ¼”, 5/32″,3/8″ -
ET105 4mm Letter And Figure Set
€24.35Create an impression with this 36 piece x 4mm letter & figure set. A positive impact marks most metal surfaces for reference, security and positive identification.
-
ET106 Carbon Tipped Scriber
€4.26This pen style engineers marking tool with a comfortable grip is effective on the hardest of surfaces. Integral clip for pocket convenience.
Features
For use on hardest of metals
6″/150mm long
Black finish
Slimline design, comfortable to use -
ET108 Engineers’ Scriber
€7.13A double ended 190mm surface marking tool with straight and 90° points both hardened and ground for long life.
Features
Hardened & ground points
Straight and 90° points
7½” Long -
ET110 Machinists Steel Square (150mm)
€12.18An engineers means to accurately check the right angle.
Features
6″ blade is hardened, tempered and polished.
Both beam and blade are ground for straightness and parallelism. -
ET111 Machinists Steel Sqare (200mm)
€18.27An engineers means to accurately check the right angle.
Features
8″ blade is hardened, tempered and polished.
Both beam & blade are ground to ensure they are both straight & parallel. -
ET113 125mm Mini Magnetic Stand
€24.35A useful accessory for the precision engineer, this magnetic stand features a powerful grip and fine adjustment. Features
Compact with powerful magnetic base
Includes disc on base to retain magnetism when not in use
For use with dial indicators -
ET114 Magnetic Base – Push On/Off
€60.89A useful accessory for the precision engineer, this magnetic base includes a powerful base grip, magnetism on two sides and an ON/OFF push switch Features
Powerful magnetic base wit on/off switch
Magnetised on two sides
For use with dial indicators -
ET115 V Block & Clamp Set
€68.19An identical pair of ‘V’ blocks for precision engineering applications, each supplied with a steel screw clamp. Manufactured from tool steel, hardened and ground to a high degree of accuracy Features
Made of hardened & ground tool steel
Supplied in pairs
V’ capacity 1½”
Block sizes 1¼x1¼x1½ inches -
ET125 Emery Wheel Dresser
€9.74Get the very best from your bench grinder by ensuring that the wheels are clean and true. For precision results this simple tool does it all. Features
Suitable for wheels up to 250mm dia. x 50mm wide.
Cast iron construction -
ET128 Depth Gauge With Protractor
€19.48A Stainless Steel measure with etched graduations for the precision engineer to determine depths up to 6″ (150mm) and angles through 180 degrees. Features
Dual calibration – inches/mm
Etched graduations 0° – 180° degrees
150mm rule adjustable throughout its length
Spring tension nut locks rule for accurate depth & angle measurement. -
ET133 3 Piece Spring Caliper Set
€19.48A useful set of 3 comparative measures for the precision engineer. Features springs which are hardened and tempered. Features
150mm Spring Dividers
150mm Outside Spring Calipers
150mm Inside Spring Calipers
Hardened & tempered Springs -
ET134 6" Pocket Rule
€3.41A slim 150mm Stainless Steel measure with clip designed to slip easily into the engineers pocket. Features
Manufactured from stainless steel
Calibrations etched in imperial and metric. -
ET135 12" Engineers Rule
€6.94A standard 300mm Stainless Steel measure for the precision engineer.
Features
Manufactured from stainless steel
Calibrations etched in imperial and metric.
End of content
End of content
1.6mm 2% Thoriated Tungsten (Packet of 10) 
2.4mm 2% Thoriated Tungsten (Packet of 10) 
WWS Pure Nickel Cast Iron Electrodes, Ni-CL 2.5mm 1KG - BLUE PACK 
1.6mm Aluminium Filler Rods (Grade 5356) 
MB15 Aluminium Contact Tip 0.8mm Genuine Binzel - packet of 10 
12" Klingspor A24 Extra Cutting-Off Discs 
MB15 Contact Tip 0.8mm Genuine Binzel - packet of 10 
MB15 Contact Tip 0.6mm Genuine Binzel - packet of 10 
Electrode Holder Screw Type - 600A 
R-Tech TIG Welder Digital AC/DC 260 Amp 240V with Accessory Kit 
1/4 BSP Standard Adaptor 5/16 Hose Tail 
Hose Connector (3/8" Nut X 3/8" Tail) 
Headgear & Airduct Assembly 
MB15 Contact Tip 1.0mm Genuine Binzel - packet of 10 
WWS Pure Nickel Cast Iron Electrodes, Ni-CL 3.2mm 1KG - BLUE PACK 
3.2mm Aluminium Filler Rods (Grade 5356) 
1/4 BSP Male - Female PCL 
Circle Cutting Kit R-TECH - Plasma 60/80/100HF 
1/4 BSP PCL Fitting Female-Female 
Twin Air Flow Coupling 
CR39 Clear Lens - 5¼" x 4½" (133mm x 114mm) - Packet of 10 
Double Union 1/4" BSP 
PCL male fitting with 1/4 BSP Female inlet 
Milwaukee M18FPP2BD-502P 18V Wrench and Grinder Power Pack (2x5Ah)